How To Fix Cracks In Countertops

The quartz countertop contractors have made sure that you buy quartz countertops and countless others because of their lifelong durability and maintenance but little do you know, at one point, these countertops may give decide to give you a hard time.

Durability of a Countertop Stone

Every natural stone such as granite, marble, limestone etc have the ability to become a little unstable over time. Since marble is a soft stone, it becomes prone to scratches and acids earlier than the others. As warned by granite installers, the trouble begins when you see cracks forming in it.

Methods to Fix Cracks in Countertops

We took some advice from the quartz countertop contractors for cracks fixture and according to them, any solid surface can be fixed using the most useful ways mentioned below.

  1. The super glue method
  2. Epoxy filler method
  3. The Super Glue Method

The super glue is a substance composed of cyanoacrylate. This method is beneficial in the case of extremely narrow cracks on the countertop surface.

What will you need?

  • Hydrogen peroxide
  • Ultra-fine Scotch Brite Pad
  • Isopropyl alcohol
  • Blow dryer
  • 220-grit and 400-grit (super glue)
  • Toothbrush
  • Cyanoacrylate (super glue)

Procedure

  1. Use ice to expand the crack as solid surfaces tend to contract upon cooling. You can use ice bags and put them on either side of the crack for better results. Let the ice sit on crack for 45 min approx. after which you will be able to see the expansion.
  2. Apply some hydrogen peroxide into the crack and use a toothbrush to clean it. If the stains are too dark or won’t go away, scrub with a chlorinated detergent.
  3. Use rubbing alcohol (isopropyl) to rinse the crack.
  4. Draw some lines 1/16 apart from edges by the crack for a better application of glue. This is the best kitchen countertop.
  5. Use the blow dryer (more on the hotter side) and start heating up the crack on either side. You’ll notice the cracks slowly closing in and completely disappearing after heating for about 20 min. After the crack has closed, you will still be able to see the mark you’d drawn earlier.
  6. Grab the super glue (Cyanoacrylate) and use it right above the crack.
  7. Now leave the countertop for a day, at least, and do not perform any chore until the glue is super hard and bonded with the countertop. This will give the countertop excess of time to gain strength.
  8. For a smooth countertop surface, first, use 220-grit sandpaper and rub it against the crack, then use 400-grit paper for a fine and non-abrasive surface.
  9. Use the Scotch Brite to polish the area. Usually the granite installers want to make sure that the Scotch Brite pad is ultra-fine grade.
  10. Epoxy Filler Method

This method is more preferred than the super glue method. There is a fat chance that the glue might wear out after some time but with Epoxy filler method, the fixture will be permanent.

Items required

  • Two-part epoxy kit
  • Denatured alcohol
  • 120-,220-,400-grit sanding discs
  • Wooden popsicles
  • Artist paint brush
  • Rags/Sponges

Procedure

  1. Use denatured alcohol to disinfect the crack.
  2. Take a disposable surface, take out two beads of epoxy fillers on it along with a hardener to fill the crack.
  3. Use color pigments or paint and mix it with the bead filler to get achieve the tine of your countertop.
  4. In order to produce the epoxy, mix the hardener to the filler.
  5. Use a good amount of epoxy for the application on the crack. Use a craft stick to apply it and let it sit there protruding above the crack surface for better results.
  6. The next step is examination. Step away and watch carefully. If the epoxy blends with the countertop then let it sit there for some time and if not, use paint to adjust the color. If everything is fine and then let it get hard. If you hurry too much, you will need to call granite installers Chantilly VA for the fixture.
  7. Starting off with 120-grit, scrub the area until you use 400 grit.
  8. Finish off by polishing the area for a sparkly look.

The quartz countertop contractors may tell you that quartz doesn’t need such heavy maintenance but be prepared always.

5 Ways To Improve The Look Of Old Granite Countertops

If your granite countertops don’t look the way you would like them to, you don’t have to replace them as there are plenty of other ways in which you can improve their look. Some of these ways include:

Painting the countertops

There is nothing that changes the look of the countertops as fast as paint. All you have to do is to find paint that looks ideal for your kitchen. You can paint the countertops by yourself or hire a professional to help you out.

When painting, you should note that the quality of paint that you use is as good as the results that you will get; therefore, ensure that you go for high-quality paints. While they will be expensive to purchase, they will last for a long time. They also will look good for long which will be a great return.

Skim coat the counters

Your countertops might be having an ugly look and you love the concrete look. If this is the case, you don’t have to remove your current countertops—you can simply skim coat the countertops with a concrete product.

For the countertop to look great you should start with getting rid of any materials that might be on the surface. You should clean the surface and if necessary, sand the countertops. If there are loose countertop strips, you should peel them off so that you can have a clear surface to work on.

Once the countertops are clean, mix the concrete by following the instructions given on the container. Your next move should be to spread it on the countertops. When making the application, be sure to get to the sides.

You should note that this option isn’t long-term; therefore, you should be ready for the concrete to come off after a short time.

Make your own concrete countertops

If you are looking for a more permanent option, you should consider installing brand new concrete counters. The process involves building several forms, mixing and pouring concrete and moving the new countertops into a new place.

If you have never done it before, it will take you sometime before you get the hang of it, but if you are patient, you will be able to give your countertops a brand new concrete look within just a short time.

If you don’t like handling the concrete, you should consider hiring a professional to help you out.

Install tile countertops

If installing concrete is too complicated, consider installing tiles on the old countertop surfaces. When choosing the new tiles, ensure that they match the kitchen theme. The cool thing with tiling the countertops is that the process has a short learning curve and it can be long lasting if you know what you are doing.

Again, if you don’t have the time or you don’t like tools and dirt, hire a countertop professional to install the tiles for you.

After installing the pieces, you need to take good care of them, for them to last for a long time. As rule of thumb avoid placing extremely hot materials on them. You also should avoid hitting them with any products that can damage them.

Install butcher block countertops

Butcher block countertops are inexpensive and you can easily install them even with minimal skills.

You should start the process by preparing the surface you are looking to install the pieces. You also should prepare the butcher’s block for installation. For you to install the block you need a drill to make holes into the cabinets.

When making the holes, be cautious that the bit doesn’t blow out the wood around the hold. You can do this by clamping a wood block against the top of the cabinet.

To keep the block in place, you need to tighten it with a screw. Tighten the screw until it pulls the block snug to the cabinet. Avoid tightening the block too much to prevent it from cracking or splitting.

Once you are done, oil the countertop with a lint-free rag. Before you start using the countertops, give the oil enough time to soak into the wood for a few minutes.

When you are done, you will have new looking countertops and you will have spent much less than you would have spent when undertaking countertop replacement NC.

Ways Of Improving The Look Of Kitchen Countertop

There are many reasons why you can decide to improve the look of your countertops. The units might be ugly to look at. They also can be in a dilapidated state. The cool thing is that there are many ways in which you can improve the look of your kitchen countertop.

Ways of giving your countertops a new look

Cleaning the countertops: Sometimes all you need to do is to clean the countertops. This is the case if you have stayed for a long time without cleaning them. In addition to cleaning the surfaces, you also need to change the cabinets, drawers, and the colors around.

You can clean the units by yourself but when it comes to the cabinets, you should leave the work to an expert unless you have the necessary experience.

Countertop repainting: There is nothing that gives the countertops a new look as fast as paint. Repainting the countertops is highly effective when your countertops aren’t damaged in any way. For you to give the countertops the perfect look, you should be cautious and choose the right color combinations.

If your countertops are porous, you should use a bonding primer. You also should consider making the surface rough by sanding it.

Cementing: If you have tile countertops, you don’t have to remove or replace them. For you to give the countertops an elegant look, you should apply cement on top of it. The cool thing about this procedure is that you don’t have to remove any tiles and even with basic handyman skills, you can do the work by yourself.

Replacing the countertops: Finally, you can decide to replace the countertops. You should choose this option when you want a completely new countertop surface.

Factors to consider when replacing the countertops

If you have decided that you should undertake countertop replacement, you should go ahead and do it. For you to get the most from the countertops, you should choose the right material.

There are many countertop materials to choose from ranging from laminate to granite. It’s upon you to choose the one that is ideal for your application and matches the look that you want to create.

You should be cautious of the ease of maintenance of the countertops that you choose. You should always go for units that are easy to maintain.

Finally, you need to consider the contractor who will undertake the countertop installation. As rule of thumb, ensure that the installation professional is reputable and experienced enough.