Just like any other appliances you might be having in your place of work, you should take good care of the oven for it to not only last for a long time, but to also give you a great service. Here are tips given by oven repair professionals on how to take good care of the oven:
Clean the oven regularly
This is a no-brainer. You should undertake both minor and major cleanings. When there is a spill or dirt on the oven, you should clean it as soon as possible. In addition to this, you should undertake a major cleaning at least twice a year to get rid of major dirt that might be there.
When cleaning it, soak the metal runners and shelves in warm water containing washing powder or dishwasher detergent. If you have it, use a vacuum cleaner to get rid of any ash that might be on the unit.
Are you using an oven cleaner to do the cleaning? Spray all of the surfaces and leave the roof as the last. This is to avoid having the cleaner dripping on your arms.
The main problem with cleaning the stainless steel interiors is streaking. To prevent this from happening, always clean small sections at a time. There are many ways in which you can clean the stainless steel surfaces:
- Using hot water and microfiber cloth
- Using vinegar and paper towel
- Using citrus-based cleaner and microfiber cloth
- Using methylated spirit and paper towel
Take good care of the blower
The blower motor is one of the integral parts of the oven thus you need to take good care of it. One of the things you should do is to ensure that it’s properly lubricated. Lubricate it with non-detergent oil at least once every six months.
If your oven has ball-bearing motors, you don’t need to lubricate it as the motors are already pre-lubricated in the factory.
When lubricating, apply the oil at the front and back of the motor. If you aren’t sure of how to do it properly, consult the manufacturer’s manual.
Place it in the right location
Since its common for the oven to get hot, you should be cautious of where you place it. As rule of thumb, avoid placing it in areas with restricted airflow. This is to prevent the unit from failing prematurely. The unit also tends to perform poorly when airflow is restricted.
For you to be on the safe side and ensure that the unit performs optimally, place it at an area that is free of obstructions.
Use correct power
Another thing you should do is to ensure that you are using the right amount of power on the oven. Some of the people have the notion that using reduced power saves them energy. While this is true, you should note that using reduced power results into poor performance.
At the same time, you shouldn’t use a lot of power on the unit. This is because you will most likely burn the fuses.
The right way of going about it is using the correct power that is given on the machine. While it might consume a little more than you would want it to, you will have an optimally working machine.
Regularly inspect the oven
Just like with the refrigerator or any other appliance you might be having in your home, you should regularly inspect the oven. One of the areas you should pay attention to is the heating elements. Check whether they are working properly and whether they are on the brink of coming apart.
When inspecting the elements, set the controller to 100% while ensuring that only one lead at a time is attached to an ammeter.
You also should inspect the thermocouples. Are they broken or have a broken extension lead? You should check this. During the inspection, pay attention to the lead. This is the area where the two thermocouple wires meet. It’s usually the source of most of the unit problems.
Appliance repair Northern VA experts also recommend that you pay attention to the door gaskets and port inserts. Check whether they are torn, broken, or have missing sections. Is there heat escaping from the oven? This might be due to torn gaskets.